SGM Studio 12 Betriebsanweisung PDF herunterladen (Seite 17)

STUDIO SC USER GUIDE

4. Set the parameters as necessary

5. Press the left-hand scroll button to move back to the unit control channels

To set up a program:

1. Decide which unit you are going to use in a programming sequence and allocate to the

unit numbers section. For the purpose, use the Unit Patch menu located into the Set

Up menu.

2. Press the Prog number you want

3. The units patched are immediately available and scenes will be stored while

programming.

To record positions and functions for each unit in each scene:

1. Select the program number, its LED will be lit

2. Select the scene number, its LED will be lit

3. Select the first unit required, its LED will flash

4. Using the faders for each function, set the unit where and how you want it or assign it a

shape.

5. Press and hold down Store button

6. Press the scene number

7. Release Store button

8. Repeat for each unit in each scene as required

To copy a scene into another:

1. Press and hold down Store button

2. Press the scene number to be copied

3. Press the receiving scene button

4. Release Store button

To check each scene:

1. Press the Program number

2. Press the Scene number

3. Press the Unit number

4. The display above the function faders will show what the different functions are doing

To disable/enable scenes:

1. Press the Program number and hold down the key

2. The key scenes, which made up the program, will lit up.

3. Press the Scene’s buttons to desable the required scenes(LED off)

4. Release the Program button

To run a program in Direct mode:

SGM Light Technology 12/12/2000 Ver. 2.04

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Keine Kommentare

SGM Studio 12 Betriebsanweisung Seite 17